… but also always make sure to interpret results correctly! This post presents a quick intro on how to perform statistical hypothesis testing and power analysis with the Accord.NET Framework in C#.

- Download the Accord.NET Framework (through NuGet)
- Fork the code repository on GitHub or browse it online

## Contents |

## Hypothesis testing

What does hypothesis testing means in statistics (and should also mean everywhere, for that matter)? You may recall from Karl Popper’s theory of falsiability that good theories can rarely be accurately proven, but you may gain a considerable confidence on them by constantly challenging and failing to refute them.

This comes from the fact that it is often *easier to falsify something than to prove it*. Consider for instance the white-swan/black-swan example: Let’s say a theory states that *all swans are white*. This is a very strong claim; it does not applies to one or a few particular observations of a swan, but *all of them*. It would be rather difficult to verify if *all* of the swans in Earth are indeed white. It is thus almost impossible to prove this theory directly.

However, the catch is that it will take only a *single contrary example* to refute it. If

we find a single swan that is black, the entire theory should be rejected, so alternate theories could be raised. It should be fairly easy to attempt to prove a theory wrong. If a theory continuously survives those attempts to be proven wrong, it becomes stronger. This does not necessarily means it is correct, *only that it is very unlikely to be wrong*.

This is pretty much how the science method works; it also provides a solution to the demarcation problem originally proposed by Kant: the problem of separating the sciences from the pseudo-sciences (i.e. astronomy from astrology). A “good” theory should be easy to attack so we can try to refute it; and by constantly challenging it and failing to prove it wrong, we gain further confidence that this theory *may*,

indeed, be right. In short:

Often the most interesting theories can’t be proven right, they can only be proven wrong. By continuously refuting alternatives, a theory becomes stronger (but most likely never reaching the ‘truth’).

Answering the question in the first phrase of this section, hypothesis testing means verifying if a theory holds even when confronted with alternative theories. In statistical hypothesis testing, this often means checking if a hypothesis holds even when confronted with the fact that it may have* just happened to be true *by pure chance or plain *luck*.

## Statistical hypothesis testing

Fisher (1925) also noted that we can’t always prove a theory but we can attempt to refute it. Therefore, statistical hypothesis testing includes stating a hypothesis, which is the hypothesis we are trying to invalidade; and check if we can confidently reject it by confronting it with data from a test or experiment. This hypothesis to be pickpocketed is often called the *null hypothesis* (commonly denoted *H _{0}*). It receives this name as it is usually the hypothesis of no change: there is no difference, nothing changed after the experiment, there is no effect.

The hypotheses verified by statistical hypothesis tests are often theories about whether or not a random sample from a population comes from a given probability distribution. This seems weird, but several problems can be cast in this way. Suppose, for example, we would like to determine if students from a classroom have significantly different grades than students from another room. Any difference could

possibly be attributed to chance, as some students may just perform better on a exam because of luck.

An exam was applied to both classrooms. The exam results (by each student) are written below:

Classroom A | Classroom B |

8.12, 8.34, 7.54, 8.98, 8.24, 7.15, 6.60, 7.84, 8.68, 9.44, 8.83, 8.21, 8.83, 10.0, 7.94, 9.58, 9.44, 8.36, 8.48, 8.47, 8.02, 8.20, 10.0, 8.66, 8.48, 9.17, 6.54, 7.50 |
7.50, 6.70, 8.55, 7.84, 9.23, 6.10, 8.45, 8.27, 7.01, 7.18, 9.05, 8.18, 7.70, 7.93, 8.20, 8.19, 7.65, 9.25, 8.71, 8.34, 7.47, 7.47, 8.24, 7.10, 7.87, 10.0, 8.26, 6.82, 7.53 |

Students: 28 Mean: 8.416 |
Students: 29 Mean: 7.958 |

We have two hypothesis:

- Results for classroom A are not significantly different from the results from classroom B. Any difference in means could have been explained due to chance alone.
- Results are indeed different. The apparent differences are very unlikely to have occurred by chance.

Since we have less than 30 samples, we will be using a Two-Sample T-Test to test the hypothesis that the population’s mean values of the two samples are not equal. Besides, we will not be assuming equal variances. So let’s we create our test object:

1 2 3 4 5 6 |
using Accord.Statistics; using Accord.Statistics.Testing; using Accord.Statistics.Testing.Power; var test = new TwoSampleTTest(A, B, hypothesis: TwoSampleHypothesis.ValuesAreNotEqual); |

And now we can query it:

1 2 |
// Check whether the test was significant (returns true) Console.WriteLine("Significant: " + test.Significant); |

Which reveals the test is indeed significant. And now we have at least two problems to address…

Problems

#### Problem 1: Statistical significance does not imply practical significance

So the test was significant. But would this mean the *difference itself is significant*?

Would this mean there any serious problem with the school teaching method?

No – but it doesn’t mean the contrary either. It is impossible to tell just by looking at the p-level.

The test only said there *was* a difference, but it can not tell the importance of this difference. Besides the two classes having performed so differently they could trigger statistical significance, we don’t know if this difference has any *practical *significance. A statistical test being significant is not a proof; it is just an evidence to be balanced together with other pieces of information in order to drawn a conclusion.

Perhaps one of best examples illustrating this problem is given by Martha K. Smith:

Suppose a large clinical trial is carried out to compare a new medical treatment with a standard one. The statistical analysis shows a statistically significant difference in lifespan when using the new treatment compared to the old one. But the increase in lifespan is at most three days, with average increase less than 24 hours, and with poor quality of life during the period of extended life. Most people would not consider the improvement practically significant.

In our classroom example, the difference in means is about 0.46 points. If principals believe a difference of less than 0.50 in a scale from 0.00 to 10.00 is not that critical, there may be no need to force students from the room with lower grades to start taking extra lessons after school. In other words, statistical hypothesis testing does not lead to automatic decision making. A statistically significant test is *just another evidence which should be balanced with other clues in order to take a decision or
draw a conclusion*.

#### Problem 2: Powerless tests can be misleading

The p-level reported by the significance test is the probability of the extreme data we found be occurring *given the null hypothesis is correct*. Often, this is not the case. We

must also know the probability that the test will reject the null hypothesis when *the null hypothesis is false*. To do so, we must compute the **power** of our test, and, better yet, we should have used this information to conclude how many samples we would need to achieve a more informative test *before* we conducted our experiment. The power is then the probability of detecting a difference if this difference indeed exists (Smith, 2011). So let’s see:

1 2 |
// Check the actual power of the test... Console.WriteLine("Power: " + test.Analysis.Power); // gives about 0.50 |

The test we performed had astonishingly small power; so if the null hypothesis is false (and there is actually a difference between the classrooms) we have only about 50% chance of correctly rejecting it. Therefore, this would also lead to a 50% chance of producing a false negative – incorrectly saying there is no difference when actually there is. The table below exemplifies the different errors we can get by rejecting or not the null hypothesis.

Null hypothesis is true | Null hypothesis is false | |

Fail to reject the null hypothesis |
Correct True negative |
Type II error (beta)False negative |

Reject the null hypothesis |
Type I error (alpha)False positive |
Correct outcome True positive |

Tests with little statistical power are often inconsistent in the literature. Suppose, for example, that the score from the first student from classroom B had earned a 7.52 instead of 7.50. Due to the low power of the test, this little change would already be sufficient to render the test nonsignificant, and we will not be able to reject the null hypothesis that the two population means aren’t different anymore. Due to the low power of the test, we can’t distinguish between a correct true negative and a type II error. This is why powerless tests can be *misleading and should never be relied upon for decision making (Smith, 2011b*).

The power of a test increases with the sample size. To obtain a power of at least 80%, let’s see how many samples should have been collected:

1 2 3 4 5 6 7 8 9 10 |
// Create a post-hoc analysis to determine sample size var analysis = new TwoSampleTTestPowerAnalysis(test) { Power = 0.80 }; analysis.ComputeSamples(); Console.WriteLine("Samples in each group:" + Math.Ceiling(analysis.Samples1)); // gives 57 |

So, we would actually need 57 students *in each classroom* to confidently affirm whether there was an difference or not. Pretty disappointing, since in the real world we wouldn’t be able to enroll more students and wait years until we could perform another exam just to adjust the sample size. On those situations, the power for the test can be increased by increasing the significance threshold (Thomas, Juanes, 1996), although clearly sacrificing our ability to detect false positives (Type I errors) in the process.

My test turned insignificant. Should I accept the null hypothesis?

The short answer is ‘*only if you have enough power*‘. Otherwise, definitively __ no__.

If you have reason to believe the test you performed had enough power to detect a difference within the given Type-II error rate, and it didn’t, then accepting the null would most likely be acceptable. The acceptance should also be accompanied of an analysis of confidence intervals or effect sizes. Consider, for example, that some actual scientific discoveries were indeed made by accepting the null hypothesis rather than by contradicting it; one notable example being the discovery of the X-Ray (Yu, 2012).

Further criticism

Much of the criticism associated with statistical hypothesis testing is often related not to the use of statistical hypothesis testing per se, but on how the significance outcomes from such tests are interpreted. Often it boils down to incorrectly believing a p-value is the probability of a null hypothesis being true, when, in fact, it is only the probability of obtaining a test statistic as extreme as the one calculated from the data, always within the assumptions of the test under question.

Moreover, another problem may arise when we chose a null hypothesis which is obviously false. There is no point on hypothesis testing when the null hypothesis couldn’t possibly be true. For instance, it is very difficult to believe a parameter of a continuous distribution is *exactly equal to* an hypothesized value, such as zero. Given enough samples, it will always be possible to find a difference, as small as it gets, and the test will invariably turn significant. Under those specific circumstances, statistical testing can be useless as it has relationship to practical significance. That is why analyzing the effect size is important in order to determine the practical significance of an hypothesis test. Useful hypothesis would also need to be probable, plausible and falsifiable (Beaulieu-Prévost, 2005).

The following links also summarize much of the criticism in statistical hypothesis testing. The last one includes very interesting (if not enlightening) comments (in the comment section) on common criticisms of the hypothesis testing method.

- Rational Wiki, Problems with statistical significance
- Simply Statistics, P-values and hypothesis testing get a bad rap – but we sometimes find them useful
- John D. Cook, Five criticisms of significance testing
- John D. Cook, Significance testing and congress

The Accord.NET Framework

Now that we presented the statistical hypothesis testing framework, and now that the reader is aware of its drawbacks, we can start talking about performing those tests with the aid of a computer. The Accord.NET Framework is a framework for scientific computing with wide support for statistical and power analysis tests, without entering the merit if they are valid or no. In short, **it provides some scissors;
feel free to run with them**.

Tests available in the framework (at the time of this writing)

As it may already have been noticed, the sample code included in the previous section was C# code using the framework. In the aforementioned example, we created a T-Test for comparing the population means of two samples drawn from Normal distributions. The framework, nevertheless, includes many other tests, some with support for power analysis. Those include:

Parametric tests | Nonparametric tests |
---|---|

Tests marked with a * are available in versions for one and two samples. Tests on the second row can be used to test hypothesis about contingency tables. Just remembering, the framework is open source and all code is available on GitHub.

A class diagram for the hypothesis testing module is shown in the picture below. Click for a larger version.

Class diagram for the Accord.Statistics.Testing namespace.

Framework usage should be rather simple. In order to illustrate it, the next section brings some example problems and their solution using the hypothesis testing module.

## Example problems and solutions

### Problem 1. Clairvoyant card game.

This is the second example from Wikipedia’s page on hypothesis testing. In this example, a person is tested for clairvoyance (ability of gaining information about something through extra sensory perception; detecting something without using the known human senses.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 |
// A person is shown the reverse of a playing card 25 times and is // asked which of the four suits the card belongs to. Every time // the person correctly guesses the suit of the card, we count this // result as a correct answer. Let's suppose the person obtained 13 // correctly answers out of the 25 cards. // Since each suit appears 1/4 of the time in the card deck, we // would assume the probability of producing a correct answer by // chance alone would be of 1/4. // And finally, we must consider we are interested in which the // subject performs better than what would expected by chance. // In other words, that the person's probability of predicting // a card is higher than the chance hypothesized value of 1/4. BinomialTest test = new BinomialTest( successes: 13, trials: 25, hypothesizedProbability: 1.0 / 4.0, alternate: OneSampleHypothesis.ValueIsGreaterThanHypothesis); Console.WriteLine("Test p-Value: " + test.PValue); // ~ 0.003 Console.WriteLine("Significant? " + test.Significant); // True. |

### Problem 2. Worried insurance company

This is a common example with variations given by many sources. Some of them can be found here and here.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 |
// An insurance company is reviewing its current policy rates. When the // company initially set its rates, they believed the average claim amount // was about $1,800. Now that the company is already up and running, the // executive directors want to know whether the mean is greater than $1,800. double hypothesizedMean = 1800; // Now we have two hypothesis. The null hypothesis (H0) is that there is no // difference between the initial set value of $1,800 and the average claim // amount of the population. The alternate hypothesis is that the average // is greater than $1,800. // H0 : population mean ≤ $1,800 // H1 : population mean > $1,800 OneSampleHypothesis alternate = OneSampleHypothesis.ValueIsGreaterThanHypothesis; // To verify those hypothesis, we draw 40 random claims and obtain a // sample mean of $1,950. The standard deviation of claims is assumed // to be around $500. double sampleMean = 1950; double standardDev = 500; int sampleSize = 40; // Let's create our test and check the results ZTest test = new ZTest(sampleMean, standardDev, sampleSize, hypothesizedMean, alternate); Console.WriteLine("Test p-Value: " + test.PValue); // ~0.03 Console.WriteLine("Significant? " + test.Significant); // True. // In case we would like more information about what was calculated: Console.WriteLine("z statistic: " + test.Statistic); // ~1.89736 Console.WriteLine("std. error: " + test.StandardError); // 79.05694 Console.WriteLine("test tail: " + test.Tail); // one Upper (right) Console.WriteLine("alpha level: " + test.Size); // 0.05 |

### Problem 3. Differences among multiple groups (ANOVA)

This example comes from Wikipedia’s page on the F-test. Suppose we would like to study the effect of three different levels of a factor ona response (such as, for example, three levels of a fertilizer on plant growth. We have made 6 observations for each of the three levels *a1*, *a2* and *a3*, and have written the results as in the table below.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 |
double[][] outcomes = new double[,] { // a1 a2 a3 { 6, 8, 13 }, { 8, 12, 9 }, { 4, 9, 11 }, { 5, 11, 8 }, { 3, 6, 7 }, { 4, 8, 12 }, } .Transpose().ToArray(); // Now we can create an ANOVA for the outcomes OneWayAnova anova = new OneWayAnova(outcomes); // Retrieve the F-test FTest test = anova.FTest; Console.WriteLine("Test p-value: " + test.PValue); // ~0.002 Console.WriteLine("Significant? " + test.Significant); // true // Show the ANOVA table DataGridBox.Show(anova.Table); |

The last line in the example shows the ANOVA table using the framework’s DataGridBox object. The DataGridBox is a convenience class for displaying DataGridViews just as one would display a message using MessageBox.

The table is shown below:

### Problem 4. Biased bees

This example comes from the stats page of the College of Saint Benedict and Saint John’s University (Kirkman, 1996). It is a very interesting example

as it shows a case in which a t-test fails to see a difference between the samples because of the non-normality of of the sample’s distributions. The Kolmogorov-Smirnov nonparametric test, on the other hand, succeeds.

The example deals with the preference of bees between two nearby blooming trees in an empty field. The experimenter has colelcted data measurinbg how much time does a bee spents near a particular tree. The time starts to be measured when a bee first touches the tree, and is stopped when the bee moves more than 1 meter far from it. The samples below represents the measured time, in seconds, of the observed

bees for each of the trees.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 |
double[] redwell = { 23.4, 30.9, 18.8, 23.0, 21.4, 1, 24.6, 23.8, 24.1, 18.7, 16.3, 20.3, 14.9, 35.4, 21.6, 21.2, 21.0, 15.0, 15.6, 24.0, 34.6, 40.9, 30.7, 24.5, 16.6, 1, 21.7, 1, 23.6, 1, 25.7, 19.3, 46.9, 23.3, 21.8, 33.3, 24.9, 24.4, 1, 19.8, 17.2, 21.5, 25.5, 23.3, 18.6, 22.0, 29.8, 33.3, 1, 21.3, 18.6, 26.8, 19.4, 21.1, 21.2, 20.5, 19.8, 26.3, 39.3, 21.4, 22.6, 1, 35.3, 7.0, 19.3, 21.3, 10.1, 20.2, 1, 36.2, 16.7, 21.1, 39.1, 19.9, 32.1, 23.1, 21.8, 30.4, 19.62, 15.5 }; double[] whitney = { 16.5, 1, 22.6, 25.3, 23.7, 1, 23.3, 23.9, 16.2, 23.0, 21.6, 10.8, 12.2, 23.6, 10.1, 24.4, 16.4, 11.7, 17.7, 34.3, 24.3, 18.7, 27.5, 25.8, 22.5, 14.2, 21.7, 1, 31.2, 13.8, 29.7, 23.1, 26.1, 25.1, 23.4, 21.7, 24.4, 13.2, 22.1, 26.7, 22.7, 1, 18.2, 28.7, 29.1, 27.4, 22.3, 13.2, 22.5, 25.0, 1, 6.6, 23.7, 23.5, 17.3, 24.6, 27.8, 29.7, 25.3, 19.9, 18.2, 26.2, 20.4, 23.3, 26.7, 26.0, 1, 25.1, 33.1, 35.0, 25.3, 23.6, 23.2, 20.2, 24.7, 22.6, 39.1, 26.5, 22.7 }; // Create a t-test as a first attempt. var t = new TwoSampleTTest(redwell, whitney); Console.WriteLine("T-Test"); Console.WriteLine("Test p-value: " + t.PValue); // ~0.837 Console.WriteLine("Significant? " + t.Significant); // false // Create a non-parametric Kolmogovor Smirnov test var ks = new TwoSampleKolmogorovSmirnovTest(redwell, whitney); Console.WriteLine("KS-Test"); Console.WriteLine("Test p-value: " + ks.PValue); // ~0.038 Console.WriteLine("Significant? " + ks.Significant); // true |

### Problem 5. Comparing classifier performances

The last example comes from (E. Ientilucci, 2006) and deals with comparing the performance of two different raters (classifiers) to see if their performance are significantly different.

Suppose an experimenter has two classification systems, both trained to classify observations into one of 4 mutually exclusive categories. In order to measure the performance of each classifier, the experimenter confronted their classification labels with the ground truth for a testing dataset, writing the respective results in the form of contingency tables.

The hypothesis to be tested is that the performance of the two classifiers are the same.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 |
// Create the confusion matrix for the first sytem. var a = new GeneralConfusionMatrix(new int[,]]] { { 317, 23, 0, 0 }, { 61, 120, 0, 0 }, { 2, 4, 60, 0 }, { 35, 29, 0, 8 }, }); // Create the confusion matrix for the second system. var b = new GeneralConfusionMatrix(new int[,] { { 377, 79, 0, 0 }, { 2, 72, 0, 0 }, { 33, 5, 60, 0 }, { 3, 20, 0, 8 }, }); var test = new TwoMatrixKappaTest(a, b); Console.WriteLine("Test p-value: " + test.PValue); // ~0.628 Console.WriteLine("Significant? " + test.Significant); // false |

In this case, the test didn’t show enough evidence to confidently reject the null hypothesis. Therefore, one should restrain from affirming anything about differences between the two systems, unless the power for the test is known.

Unfortunately I could not find a clear indication in the literature about the power of a two matrix Kappa test. However, since the test statistic is asymptotically normal, one would try checking the power for this test by analysis the power of the underlying Z-test. If there is enough power, one could possibly accept the null hypothesis that there are no large differences between the two systems.

Suggestions

As always, I expect the above discussion and examples could be useful for interested readers and users. However, if you believe you have found a flaw or would like to discuss any portion of this post, please feel free to do so by posting on the comments section.

PS: The classroom example uses a T-test to test for differences in populations means. The T-Test assumes a normal distribution. The data, however, it not exactly normal, since it is crippled between 0 and 10. Suggestions for a better example would also be appreciated!

References

R. A. Fisher, 1925. Statistical Methods for Research Workers. Available online from:

http://psychclassics.yorku.ca/Fisher/Methods/

M. K. Smith, 2011. Common mistakes in using statistics: Spotting and Avoiding Them – Power of a

Statistical Procedure. Available online from:

http://www.ma.utexas.edu/users/mks/statmistakes/power.html

M. K. Smith, 2011b. Common mistakes in using statistics: Spotting and Avoiding Them – Detrimental

Effects of Underpowered or Overpowered Studies. Available online from:

http://www.ma.utexas.edu/users/mks/statmistakes/UnderOverPower.html

L. Thomas, F. Juanes, 1996. The importance of statistical power analysis: an example from animal behaviour,

Animal Behaviour, Volume 52, Issue 4, October., Pages 856-859. Available online from: http://otg.downstate.edu/downloads/2007/Spring07/thomas.pdf

C. H. (Alex) Yu, 2012. Don’t believe in the null hypothesis? Available online from:

http://www.creative-wisdom.com/computer/sas/hypothesis.html

D. Beaulieu-Prévost, 2005. Statistical decision and falsification in science : going beyond the null

hypothesis. Séminaires CIC. Université de Montréal.

T.W. Kirkman, 1996. Statistics to Use. Acessed July 2012. Avalilable online from

http://www.physics.csbsju.edu/stats/

E. Ientilucci, 2006. “On Using and Computing the Kappa Statistic”. Available online from http://www.cis.rit.edu/~ejipci/Reports/On_Using_and_Computing_the_Kappa_Statistic.pdf

cool! i just started learning c# and i tried to look for things I can expect in this and saw this . It means more learning for me. thanks for sharing.